LSK Is Proud To Introduce The 2005+ Toyota Tacoma 2wd Race Kit. Our Race Kit Uses A Set Of Custom Upper & Lower Control Arms, Fully Fabricated Spindle, Extended Heimed Tie Rod w/ Machined Steering Clevis And Plate Shock Tower w/ Integrated UCA Mounts To Vastly Improve The On & Off Road Ride Quality. This Kit Is Best Suited For Those Who Use Their Vehicle As A Dedicated Off Road Rig Or One That Sees Occasional Street Use.
PERFORMANCE SPECS
- Wheel Travel - Averages 16" Of Useable Wheel Travel (Depending On Limit Strap / Bump Stop / Shock Configuration)
- Wheel Base: Extended 1.25" Forward
- Track Width: Extended 4.5" On Each Side
- Recommended Tire Size: 35"
- Recommended Wheel: 17 x 9" w/4.5" Backspacing (0mm Offset)
INCLUDES
- Upper Arms
- Lower Arms
- Spindles
- Tierods w/ Machined Steering Clevis
- Shock Towers w/ Integrated UCA Mounts
- Grade 8 Hardware
REQUIRES
- 10" 2.5" Coilovers (NOT INCLUDED IN KIT ABOVE)
- 10" 3.0" Bypasses (NOT INCLUDED IN KIT ABOVE)
- Welding Is Required - This Is Not A Bolt On System And Will Require Proficient Knowledge In Fabrication To Perform The Installation
- Extended Brake Lines (Minimum 33" Line End To End)
- Possible Extension Of Factory ABS Sensor Line (Depends On Wire Routing)
- Bumpstops - Can Be Configured To Bump Off Of Lower Control Arm, Upper Control Arm Or Spindle Uniball Cup - Typically Recommend a 2.0" Body x 2" Stroke
- Limit Straps - Recommend 8" Limit Strap With Adjustable Clevis Kit
OPTIONAL UPGRADES
- Extended Brake Lines - Stainless Steel Braided Brake Lines With Black Covers Specifically Engineered For This Application
- Powdercoat Finish - Textured Black Or "LSK Grey" Finishes Available For All Coated Portions Of This Assembly (Shock Towers / Shock Hoops Ship Raw)
IMPORTANT NOTES
- WHILE WEBSTORE MAY DISPLAY AN IN STOCK STATUS, WEBSTORE DOES NOT TRACK KIT INVENTORY IN REAL TIME - PLEASE CONTACT OUR SALES TEAM FOR CURRENT LEAD TIME ON KIT COMPONENTS
- Coilovers And Bypasses Are Custom Ordered And Not Always Stocked Per Application. Please Email Our Sales Team For Current Lead Time On Shock Packages
- Powdercoat Finish - Textured Black Or "LSK Grey" Finishes Available For All Coated Portions Of This Assembly (Shock Towers / Shock Hoops Ship Raw) - Please List Color Choice In Comments Section Of Your Order, Raw Finish Is Available But May Have An Additional Lead Time
- Upper Control Arm: Use 7/8"-14 Rod Ends - Replacement Rod Ends Can Be Purchased Through Our Online Store Under Builders Components
- Spindles: Use A 1.00" FK Uniball (PN: WSSX16T) And Replacements Can Be Purchased Through Our Online Store Under Builders Components
- Lower Control Arms: Use A 1.50" FK Uniball (PN: COMH24T) & LSK 1.75" Delrin Bushings. Replacements Can Be Purchased Through Our Online Store Under Builders Components
- Permanent Frame Modification - Shock Tower Is Installed In Place Of Factory Shock & Upper Control Arm Mounts